General Purpose ESD Mats Technical Datasheet
General Purpose ESD Mats are made of light texture single layer ESD vinyl material. They are designed to provide a static safe work surface where anti static control is required. These mats are low cost, durable, easy to cut and reversible. Surface resistivity is 109 – 1010 Ohms. They meet ESD S4.1-1997 standards. These ESD table top mats are also known as homogeneous mator ESD work surface mats.
TYPICAL PHYSICAL PROPERTIES (1)
Construction
A homogeneous polymer mixof durable polyvinyl chloride, our 1059 series solid work surface mats aredesigned to provide a static safe work surface when ESD properties arerequired.
ChemicalResistance
Resistantto degradation by inorganic acids, organic acids, reducing agents, detergentsolutions, alcohols, aliphatic hydrocarbons, mineral oil, amines, and aldehydes.
PhysicalProperties:
Color |
Blue, Gray |
|
Emboss Pattern |
Kid Grain |
|
Gauge/Thickness |
0.094′′ ± 0.010′′ ; 3/32′′ |
|
Tensile |
900 lb/in² minimum |
ASTM D412, Die C |
Elongation |
160% minimum |
ASTM D412, Die C |
Tear |
160 lb/in minimum |
ASTM D624, Die C |
Durometer |
85 ± 5, Shore A |
ASTM D2240 |
ESD Properties: Range @ 100 V |
109 – 1010 W |
ESD S4.1-1997 |
Suggested Service Temperature |
–20 °F to +160 °F (2) |
|
(1)
(2)
Due to the variety ofpossible end-uses, it is ultimately the responsibility of the customer todetermine a product’s suitability for a particular application.